Overall Dimention:- Height of desk top in mm (± 5mm) 750, Depth of desktop in mm (± 5 mm) 380 ( depending on step depth), Width of
desktop in mm (±5mm) 615 ,(Depending upon the curve & layout). Required Depth of step is 980 mm to 1050 mm.
Understructure:- Vertical legs are made of MS ERW tube of size 75 x 25 x 2 mm thick rectangular tube with 5 mm thick HR brackets as per IS and 2
mm thick CRCA brackets as per IS-513 Welded on to the tubes. Sturdy anchoring by anchor bolts on to base of 2 mm thick Formed pedestal bracket
for proper resting of leg. Top support bracket made up of 2mm thick CRCA sheet, welded with vertical leg pipe. Modesty horizontal support member of
frame is to be made from combination of MS ERW tube section (IS: 7138) of size 80x40x2.5 mm thick rectangular tube Assembly is powder coated with
epoxy Polyester. Horizontal Members & Vertical Legs has been joint with round pin for flexibility.
Modesty- Made of 25 mm thick pre-laminated twin board of E-2 P2 grade and approved shade conforming to IS all the edge of modesty are provided
with machine pressed 2 mm thick pvc edgeband with hot melt glue.
Top- Made of 25 mm thick pre-laminated twin board of E-2 P2 grade and approved shade conforming to IS all the edge of top are provided with
machine pressed 2 mm thick pvc edgeband with hot melt glue.
Finish- All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
Note:- Floor must be minimum 100mm thick RCC slab to grout the desk or otherwise written confirmation on deviation should be taken, as regard to
floor.
Steps depth must be as per layout – deviations must be discussed and written consent is must in this regard before placing the order.